professional floor cleaning equipment x20

professional hard floor cleaning machine

Battery Operated Ride-On Floor Scrubber x20

commercial floor cleaning machines for sale x20

Technical Documents

GIYO‘s Floor Cleaning Machine Manual

Ride on Floor Scrubber

Cylindrical Brush Ride On Floor Scrubber X20C, Sweep & Scrub 1-Pass

GIYO X20C Cylindrical Brush Ride On Floor Scrubber combines 1016mm rollers to sweep and scrub 7,500m²/h in one pass, eliminating pre-sweeping. Its 1,016mm brush length and 4.8Mpa pressure dig dust out of joints, while 390L/400L tanks run 4–6h shifts. Weighing 650kg with 8° gradeability, it climbs dock ramps, leaving warehouse, factory and logistics tile, epoxy or concrete spotless—rapid, deep, industrial cleaning without downtime.

Polyethylene Armor

One-shot rotomolded skin shrugs off salt spray and chemical mist—perfect for coastal or food-processing yards without repainting.

1,016mm Cylindrical Path

Twin 680W side brushes sweep and scrub in one motion, digging dust out of expansion joints that flat discs miss.

Dust-Tight Hopper Seal

Compression-lock lid and ribbed seal keep fine dust inside the 400L bin, preventing puff-back during emptying and keeping outdoor air clean.

Hydraulic Drive & 8° Grade

Oil-bath wheel motors deliver 0-12km/h smoothly and climb steep ramps without gear shift, keeping constant roller speed for even, dust-free results.

Easy Use

Simple controls make training fast and cleaning tasks much easier daily.

Time Saving

Wide brushes and strong suction clean large floors quickly with less effort.

Cost Efficient

Low water use and durable parts help reduce long term operating costs.

Safe Floors

Strong squeegees leave surfaces dry and safe, lowering slip and fall risks.

Technical Specifications

Our floor scrubbers and sweepers feature powerful brush motors, large-capity solution and recovery tanks, advanced filtration systems, and eco-friendly battery options for extended runtime.

CHECK VIDEO NOW

Performance Metrics

Cleaning Path Width

1120MM

Productivity

7500M²/H

Brush Motor

680W*2

Brush Pressure

5.8KPA

Brush Speed

580RPM

Brush Diameter

1016MM

Tank Capacity

Solution Tank

390L

Recovery Tank

400L

Squeegee Width

1380MM

Solution Flow Rate

Adjustable

Vacuum Motor

554W*2

Filtration System

HEPA-grade filtration

Power & Battery

Battery Type

36V lithium-ion, 460Ah

Run Time

4-6H

Charge Time

80% in 3 hours, 100% in 4 hours

Charger Included

36V/50A smart charger

Battery Lifespan

1000+ charge cycles

Battery weight

250KG

Dimensions & Weight

Dimensions(L x W x H)

2225*1345*1537MM

Weight (with batteries)

864KG

Turning Radius

1150MM

Noise Level

75dBA

Shipping Dimensions

2300*1350*1700MM

Shipping Weight

950KG

International Certification

CE Certified

ISO Approved

Safety Tested

Quality Assured

Eco Certified

Standard Compliant

Powerful Features

Engineered with advanced scrubbing and sweeping technology, our professional floor cleaning machine deliver superior cleaning results with minimal effort. Designed for efficiency and reliability in commercial and industrial environments.

Cylindrical 1016mm Brushes

Two counter-rotating rollers sweep debris forward while agitating embedded dust and oil, eliminating pre-sweeping on tile, epoxy, concrete and vinyl in a single pass.

1,016mm Sweep & Scrub Path

Extra-long brush line combined with 1,380mm squeegee covers 7,500m²/h, cutting large-area cleaning time by 25% in warehouses and logistics hubs.

4.8Mpa Deep-Clean Pressure

High down-force drives bristles into expansion joints, lifting fine dust and stubborn grease that flat discs often miss.

390L/400L Split-Tank System

Roto-molded polyethylene tanks share one shell but stay isolated, balancing 1164kg weight while providing 8–10hours of continuous operation between fills.

36V High-Capacity Battery with Opportunity Charge

460Ah packs deliver full-shift runtime, accept quick top-ups during breaks and reduce 30% less weight than lead-acid for easier ramp climbing.

8° Gradeability with Counterbalanced Drive

Weighted rear axle plants the drive wheels and maintains even brush pressure when climbing steep dock plates or uneven factory floors, preventing skip-marks.

How It Works

Our cleaning equipment delivers exceptional performance through a streamlined and efficient process.

Solution Application

A centre-feed valve releases solution between the 1016mm cylindrical brush, wetting the surface just enough to loosen dust without flooding joints or wasting chemical.

Scrubbing Action

Counter-rotating rollers sweep debris forward while 4.8Mpa pressure drives bristles into joints, lifting embedded dust and oil films in one smooth forward motion.

Vacuum Extraction

A floating 1,380mm parabolic squeegee follows floor contours, channeling dirty water and swept grit into the 400L tank so wide paths are dry and safe before the operator turns.

Short Description

Technical Support & Services

1. Dedicated Technical Expertise & Remote Diagnostics
2. Genuine Parts Portal & Rapid Global Dispatch
3. Proactive Maintenance Programs & Training

1. Lifetime Technical Consultation
2. Warranty & Flexible Service Contracts
3. Continuous Improvement & Software Updates

Tel/whatsapp : +86 153 4552 7791
Email ：info@indusfloorscrubber.com
The actual work : 9:00am -18:00pm

visit our dedlicated support portal ➡

Recommended Spare Parts

Having a clear idea is far more important than working hard, having a correct attitude is far more important than actual performance

Water Injection Cover

Vacuum Motor

Traction motor

Suction Hose

Squeegee Rubber

Squeegee assembly

APPLICABLE GROUND

Concrete Floors

Epoxy Flooring

Ceramic Tile Floors

Marble & Granite Floors

Asphalt Surfaces

PVC & Vinyl Floors

Warehouse Concrete Slabs

Anti-static Fooring

Customer Reviews

Discover feedback from businesses that use our cleaning solutions. These reviews share real experiences with our equipment’s performance, durability, and the difference it has made in their daily operations—helping you make a confident decision.

Request a quote

Having a clear idea is far more important than working hard

Our Mailing Address

Factory No. 3 of Lingang Intelligent Manufacturing industrial Park, longziha District, Bengbu City, Anhui Provice.

Tel/Whatsapp

+86 153 4552 7791

info@indusfloorscrubber.com

Consult Us

Name

Telephone

Your Company Size

Message

I agree to the privacy policy and consent to being contacted.

Ride on Floor Scrubber

Walk Behind Floor Scrubber

Ride on Floor Sweeper