Category List

HOW CAN WE HELP YOU

You can contact us in any convenient way.

Tags

Floor scrubber pad colors help identify common applications, but color alone cannot confirm that a pad suits your floor or machine. Start with the cleaning task, check the floor finish, identify the exact pad product, and then confirm its size and operating requirements.

Red commonly indicates routine cleaning in traditional pad ranges. Blue and green often identify more intensive scrubbing products, while brown and black commonly appear in stripping ranges. Specialty pads may follow entirely different color systems.

The correct replacement is a pad with the right specification—not simply the same color as the old one.

Common Color Conventions for Traditional Floor Pads

Verify the exact product before use. This table describes common conventions, not a universal color standard.

Color Common use in traditional pad ranges What must be verified
White Usually polishing; some products also permit light cleaning Intended application, floor compatibility, and machine speed
Red Routine cleaning, light scrubbing, or buffing Suitability for the existing floor finish
Blue More intensive cleaning or scrubbing Whether the product affects or removes part of the finish
Green Heavy scrubbing in many ranges Whether the specific product is for cleaning, surface preparation, or finish removal
Brown or black Commonly stripping or aggressive surface work The intended level of finish removal and the approved process

Manufacturer selection guides also include specialty products outside these conventions. Do not apply a simple light-to-dark abrasiveness rule to every pad range.

Cleaning and Stripping Are Different Jobs

Routine cleaning removes soil while preserving the floor and its protective finish.

Stripping deliberately removes an existing floor finish. It is not simply a stronger version of routine cleaning. The finish being removed may be a polymer coating rather than traditional wax.

This distinction matters when choosing an aggressive pad. If the goal is to clean a finished floor without removing its protective layer, a stripping pad may be unsuitable even when it removes the visible dirt.

Before choosing a pad, define the intended result:

  • Maintenance cleaning: Remove routine soil while preserving the finish.
  • Deeper cleaning: Remove more difficult soil using a process approved for the surface.
  • Surface preparation or stripping: Intentionally alter or remove an existing finish as part of a specified maintenance process.

“Deep cleaning” alone is not a sufficiently precise instruction for selecting a pad.

Follow This Five-Step Selection Process

Cleaning task → floor and finish → exact pad product → machine compatibility → small-area test

1. Define What Needs to Be Removed

Identify whether the problem is loose dirt, oily residue, scuff marks, or an existing protective layer.

Do not automatically choose a more aggressive pad when routine cleaning is unsuccessful. An unsuitable detergent, contaminated attachment, or poor water recovery may be responsible.

2. Identify the Floor and Its Finish

Check both the underlying material and any coating.

For example, coated concrete and uncoated concrete may require different cleaning methods. A pad suitable for one should not automatically be used on the other.

Consult the flooring or finish supplier’s maintenance instructions. If the coating is unknown, identify it before testing a process that could remove it.

3. Select an Exact Product

Record the pad manufacturer, product name, and product code.

“Red cleaning pad” is an incomplete purchasing specification. Products with similar colors may differ in construction, abrasiveness, approved surfaces, and operating-speed range.

This is especially important when changing brands. Specialty diamond, preparation, and polishing pads can use their own color sequences.

4. Confirm Machine Compatibility

Check the required:

  • Pad diameter or rectangular dimensions.
  • Shape and thickness.
  • Pad-driver and retention arrangement.
  • Operating-speed range.
  • Wet or dry application.

A pad that physically fits is not necessarily approved for the process.

For example, a pad designed for high-speed burnishing should not be treated as interchangeable with a wet-scrubbing pad. Installing it does not turn an automatic floor scrubber into a burnisher.

5. Test Before Full-Area Use

Choose an inconspicuous but representative area. Remove loose grit, inspect the pad driver, and fit the pad according to the machine instructions.

Use the approved cleaning solution and settings. After a controlled pass, let the surface dry and inspect for remaining soil, haze, new marks, or changes in gloss.

When comparing pads, keep the other settings consistent. Stop if the floor changes unexpectedly.

How to Order the Correct Pad Size

Use the individual pad specification for the machine—not its overall cleaning-path width.

This distinction is particularly important for dual-disc scrubbers.

As a hypothetical example, a machine specified to use two 13-inch pads requires two pads of that size, not one 26-inch pad. The combined brush arrangement and overlap also mean that adding individual pad diameters is not a reliable way to establish actual cleaning width.

When ordering for a walk-behind floor scrubber or another disc machine, confirm the model and approved pad-driver specification.

Ordering detail Why it matters
Machine model Identifies the relevant equipment specification
Pad-driver part number, where available Helps confirm the attachment arrangement
Individual pad dimensions Prevents confusion with total cleaning width
Number of pads required Distinguishes single-disc and dual-disc setups
Exact pad product code Identifies the tested product rather than just its color
Floor material and finish Helps assess application suitability

For machines that use rectangular or other non-disc pads, follow their specified dimensions and attachment requirements.

When the Right Color Still Gives Poor Results

Before selecting a different pad, inspect the one in use.

Embedded grit, heavy soil loading, damage, or uneven wear can affect cleaning and surface appearance. Follow the pad manufacturer’s cleaning and replacement instructions; do not continue using a pad until the driver can contact the floor.

If soil remains in recessed joints or textured areas, an approved brush may provide better contact than a flat pad. Choosing a darker pad will not necessarily solve a reach problem.

Keep tested products labeled by product code and approved task. This helps prevent a pad intended for finish removal from being used for routine cleaning.

Frequently Asked Questions

Should I choose pad size from brush diameter or cleaning width?

Use the pad size specified for the machine and its pad driver. Do not infer it from the advertised cleaning width, especially on dual-disc equipment. If the documentation is unclear, confirm the size using the model and attachment details.

How can I replace a pad if its packaging is missing?

Check purchasing records, storage labels, and any remaining product identification. Confirm machine compatibility separately.

A photograph and measurements can help a supplier narrow the options, but color and appearance may not establish the exact product. If it cannot be identified, select an approved replacement and test it before full-area use.

What information should I provide when changing brands?

Provide the current product code if known, machine model, pad dimensions, floor material, finish, and cleaning task. Ask for a replacement matched to those requirements—not merely the same color.

Can the same pad be used for cleaning and stripping?

Only if the specific product instructions permit both applications and the floor-maintenance process allows it. Do not assume a routine cleaning pad and a stripping pad are interchangeable.

Confirm the Equipment Details Before Ordering

Choosing a replacement pad becomes easier when the machine and application are clearly identified.

For questions about GIYO equipment specifications, contact GIYO with the machine model, pad-driver details, and photos of the existing attachment. Include the floor type and cleaning task when discussing the intended application.

Explore GIYO floor cleaning equipment when comparing machines for your facility.

Related Products

Consult Us